Connect CK11 to NK823x

  1. In System Browser, depending on the NK823x serial line connection, select one of the following:
    - Project > Field Networks > [BACnet Network] > [NK823x] > [COM1]
    - Project > Field Networks > [BACnet Network] > [NK823x] > [COM2]
    - Project > Field Networks > [BACnet Network] > [NK823x] > [Expansion Board] > [COM3]
    - Project > Field Networks > [BACnet Network] > [NK823x] > [Expansion Board] > [COM4]
    NOTE:     If COM 3 or COM 4 is used, you need to configure the NK823x expansion board. See Add the COM3-COM4 Expansion Board.
  1. Select the NK8000 tab.
  1. In the Configuration expander, from the Control unit drop-down list select the CK11 gateway you configured previously.
  1. Click Save .